P2422_Tool system TC20-4 ID FANUC M-10iA_

Tool system TC20-4 ID FANUC M-10iA

P2422

Tool systems from Robot System Products are complete plug-and-play solutions designed for quick and easy installation. With our tool systems, compressed air and electrical signals are supplied to the tool with a minimum of limitations on the robot’s working range.

RSP tool systems simplify and reduce required design time, as the components all are matched, and the media supply is already fully adapted to the specific robot and its functions.

This tool system is used when tool changing capability and 4 pneumatic channels are required. It consists of a tool changer TC20-4 ID, hose package, valve unit and cabling.

Mechanical interface
ISO 9409-1 40-4-M6
Working temperature
+ 10°C - +60°C | 50 °F - 140 °F
Payload
20 kg | 44.1 lb
Fz
± 200 N | ± 45 lb
Mz
± 100 Nm | ± 900 lbf·in
Mx/My
± 200 Nm | ± 1800 lbf·in
Number of customer air ducts
4
Total number of air ducts
6
Dedicated air ducts
TC Open, TC Close (6-10 bar)
Air quality
Oil-clean and waterless filtered air, with max 25µm particle content
Valve size
ISO 18 mm IE (ISO 15407-2)
Mechanical interface
ISO 9409-1 40-4-M6
Working temperature
+ 10°C - +60°C | 50 °F - 140 °F
Payload
20 kg | 44.1 lb
Fz
± 200 N | ± 45 lb
Mz
± 100 Nm | ± 900 lbf·in
Mx/My
± 200 Nm | ± 1800 lbf·in
Number of customer air ducts
4
Total number of air ducts
6
Dedicated air ducts
TC Open, TC Close (6-10 bar)
Air quality
Oil-clean and waterless filtered air, with max 25µm particle content
Valve size
ISO 18 mm IE (ISO 15407-2)